| Project name | Technical Specification | Brand |
| Application | solidify |
YI JIANG |
| Type | Uv lamp Conveyor machine |
| Model | YJ600-2 |
| Major configurations |
| Wavelength | 365nm |
| Uv lamp total lenth | 600mm |
| Uv lamp curing lenth | 600mm |
| Max thickness of cured | Curing products are recommended within 500mm |
| Uv lamp power | 3kw * 2 lamps |
| UV lamp installation location | At the top, ultraviolet light shines down |
| Control UV lamp mode | 1)UV transformer and UV capacitor,50HZ 380V
2)UV lamp power strong light, low light adjustable
3)UV lamp is controlled separately |
| lamphose | - Aluminum curved lamp shade plus imported reflector
- Lamp bracket up and down distance, Angle can be adjusted
|
| structure of equipment |
| Machine outside size | L2000*W870*H1550mm |
| Feeding width | 600mm |
| Belt width | 600mm |
| Conveyor Material | Stainless Steel Mesh Belt or Teflon Mesh Belt (can choose) |
| Product height | 0-100mm (Adjustable ) |
| Curing furnace length | 900mm |
| Inlet and outlet length | 450mm |
| Uv blocking length | 300mm |
| conveying speed | 0.1 to 7M/min (stepless Adjustable ) |
| Conveyor height | 1)The conveyor belt is designed to be 750 mm above the ground
2)Plastic cup with brake casters. |
| Control system |
| Operating mode | Manual operation |
| Input voltage | 380V 50/60HZ |
| Cooling way | Air |
| Packing |
| Packing | Wooden box package |
| Weight | About 420kg |
| Warranty | 1 years |
Note:Can be customized according to customer requirements
Application example
Specially used for uv curing of electroacoustic components, such as loudspeaker, receiver,
speaker, microphone, hands-free headset, vibration motor, EL, LENS... UV adhesive curing
application.
Typical characteristics
It is one of the preferred products of electroacoustic component manufacturers, with excellent
cost performance.
It USES high-intensity ultraviolet light source configuration, combined with UV cold mirror, IR
filter optical lens and other optical technology to process the heat produced in the process of
ultraviolet radiation for scientific treatment, to achieve high ultraviolet energy, low temperature
effect, to overcome the loss of product deformation.
Usually, the magnetic property of electroacoustic components will decrease or even lose its
magnetic property after reaching a certain temperature. This model can completely ensure
the device to be cured at the same time at a low temperature, so as to avoid losing or
reducing its magnetic property, thus improving the product qualification rate and reducing t
he cost.
Product advantages
The machine has beautiful appearance, light weight, space saving, wide application, reliable quality,
safe use, convenient operation, etc.The high-quality high-efficiency lamp is used, and the lamp room
is forced to exhaust heat to extend the service life of the lamp and protect the dry items from heat
deformation. Optional quartz filter for cooling.
